Embry ASCI310 Module 7.6 Assignment Exercise 7 latest 2016 December

Exercise 7: Climb

1. Given conditions of “Saw-tooth” climb flight test.

Pressure Altitude-2000 ft Weight 300,000 lbs

Single engine Method Constant Airspeed Climb +/- 500 ft

Temperature:Standard (Climb from 1500 ft to 2500 ft)

Assume negligible airspeed errors due to position and compressibility

Airspeed	Airspeed	Climb Time	Average Rate of Climb	Average Rate of Climb	Angle of Climb
(KIAS)	(KTAS)	(s)	(ft/min)	(kts)	(deg)
140		80
160		65
180		60
190		70

Fill out the above table.

Find: (a) Indicated Airspeed for Vx(Best Angle Climb Airspeed) and Vy(Best Rate of Climb Airspeed)

(b) Angle of Climb for Vx

(c) Rate of Climb for Vy

(d) Specific Excess Power at Vy

(e) Excess Thrust at Vy and Vx

2. Follow on from Exercise 4:

Given Conditions:

Gross Weight for Cruise = 300,000 lbs

Wing Area = 3050 ft²

Wing Span = 156 ft

Wing Efficiency = .80

C_Dp = 0.0119

Twin turbofan engine Aircraft

Thrust @ sea level = 50,000 lb/per engine

Temp-Standard

Figure 2.1

Figure 4.3, 4.5

Figure 5.1

Figure 6.5

(a) Find Rate of Climb at Max Endurance Airspeed at FL350 100% RPM (Thrust Available from Exercise 4 and Thrust Required from Exercise 3).

(b) Find Angle of Climb at Max Endurance Airspeed at FL350 100% RPM (Thrust Available from Exercise 4 and Thrust Required from Exercise 3).

3. Find Cost Index (lb/hr) of an aircraft that has operating costs including maintenance and aircrew of $ 3,000 /hr with fuel costs of $5.00 / gallon.

Assume Jet Fuel = 6.8lb/gallon.