Question
Offered Price $50.00

BSOP 429 Week 8 Final Exam - DeVry

Question # 00023221
Subject: Education
Due on: 08/18/2014
Posted On: 08/16/2014 04:41 PM

Rating:
4.1/5
Expert tutors with experiences and qualities
Posted By
Best Tutors for school students, college students
Questions:
128
Tutorials:
324
Feedback Score:

Purchase it
Report this Question as Inappropriate
Question

BSOP 429 Week 8 Final Exam
BSOP 429 Production Activity Control and Just-in-Time with Lab - DeVry

BSOP 429 Week 8 Final Exam - Set 1
  • Page 1
1. (TCO 4) The priority rule, which will sequence jobs in the order they are received, is _____. (Points : 5)
2. (TCO 2) In an assignment method problem, if it takes Abe 3 hours to build a birdhouse and 4 hours for a doghouse, and Betty takes 4 hours for a birdhouse and 3 hours for a doghouse, what is the reduced cost (in hours) of assigning Betty to build the doghouse? (Points : 5)
3. (TCO 2) A major difference between manufacturing and service systems in terms of scheduling is (Points : 5)
4. (TCO 3) Scheduling in service systems may involve scheduling which of the following?(Points : 5)
5. (TCO 5) The owner and operator of the local franchise of Handyman, Inc., has four jobs to do today, shown in the order they were received:
6. (TCO 6) Building up an inventory of standard parts or modules instead of immediately producing the finished end items is the essence of (Points : 5)
7. (TCO 7) With regard to suppliers, JIT systems typically require (Points : 5)
8. (TCO 10) Which of the following is characteristic of the JIT philosophy? (Points : 5)
9. (TCO 1) In make-to-stock systems, fluctuations in sales volume are managed through which of the following? (Points : 5)
10. (TCO 5) In an MRP master schedule, the planning horizon is often separated into a series of times periods called (Points : 5)
  • Page 2
1. (TCO 8) Explain how cellular manufacturing represents a flexible manufacturing system. (Points : 25)
2. (TCO 11) State the four building blocks of lean operations, and explain how fast and simple are the two common threads that run through them. (Points : 25)
3. (TCO 9) Elaborate on the statement: "The output of the system cannot exceed the output of the bottleneck operation(s)." (Points : 25)
4. (TCO 4) Differentiate between infinite loading and finite loading as two major approaches used to load work centers. (Points : 25)
5. (TCO 12) The theory of constraints has a goal of maximizing flow through the entire system. (Points : 25)
6. (TCO 2) Refer to the following data for jobs waiting to be processed at a single work center (jobs are shown in order of arrival):
7. (TCO 10) Respond to the question: "Which is better, MRP or JIT?" (Points : 25)
8. (TCO 1) The design of the MPC system is influenced by some key features of market demand and product design. Name the key features that will lead to an assemble-to-order system and explain the rationale. (Points : 25)

9. (TCO 6) Market requirements drive the choice of the shop floor system approach. Describe and explain the type of market requirements that would be suitable for an MRP-based system, along the lines of product design, product variety, product volume per period, product mix changes, and delivery schedule changes. (Points : 25)
10. (TCO 10) Manufacturing strategy also drives the choice of shop floor system. Describe and explain the strategies that lend themselves to a JIT-based system, from the perspective of WIP, changeover cost, and process choice. (Points : 25)

BSOP 429 Week 8 Final Exam - Set 2
  • Page 1
1. (TCO 4) The two different approaches to load work centers in job-shop scheduling are (Points : 5)
2. (TCO 2) The priority rule where jobs are processed according to the smallest ratio of due date to processing time is (Points : 5)
3. (TCO 2) A scheduling rule used for sequencing jobs through two work centers is (Points : 5)
4. (TCO 3) The owner and operator of the local franchise of Handyman, Inc., has four jobs to do today, shown in the order they were received:……………….If he uses the first-come, first-served (FCFS) priority rule to schedule these jobs, what will be the average completion time? (Points : 5)
5. (TCO 5) The ultimate goal of JIT operations is to have (Points : 5)
6. (TCO 6) Building up an inventory of standard parts or modules instead of immediately producing the finished end items is the essence of (Points : 5)
7. (TCO 7) A kanban card is used to signal that (Points : 5)
8. (TCO 10) The type of processing system that is used for highly standardized products is (Points : 5)
  • Page 2
1. (TCO 8) Does cellular manufacturing apply best to repetitive, high-volume product or nonrepetitive, low-volume product? Explain and give an example. (Points : 25)
2. (TCO 11) Validate or invalidate the statement that although inventories are maintained, the goal of lean operations is to maintain a minimum of safety stock. (Points : 25)
3. (TCO 9)Elaborate on the statement: "The output of the system cannot exceed the output of the bottleneck operation(s)." (Points : 25)
4. (TCO 4) Differentiate between infinite loading and finite loading as two major approaches used to load work centers. (Points : 25)
5. (TCO 12) Explain why batch process helps maximize worker efficiency. (Points : 25)
6. (TCO 2) Refer to the following data for jobs waiting to be processed at a single work center (jobs are shown in order of arrival):……………………Batch job requires specialized operations carried out by different workers or group of workers and so there is a need for more specialization and standardization. What is the schedule sequence using the first-come, first-served (FCFS) priority rule? (Points : 25)
7. (TCO 10) Respond to the question: "Which is better, MRP or JIT?" (Points : 25)
8. (TCO 1) The design of the MPC system is influenced by some key features of market demand and product design. Name the key features that will lead to a make-to-stock system and explain the rationale. (Points : 25)
9. (TCO 6) Market requirements drive the choice of the shop floor system approach. Describe and explain the type of market requirements that would be suitable for an MRP-based system, along the lines of product design, product variety, and product volume per period, product mix changes, and delivery schedule changes. (Points : 25)
10. (TCO 10) Manufacturing strategy also drives the choice of shop floor system. Describe and explain the strategies that lend themselves to a JIT-based system, from the perspective of WIP, changeover cost, and process choice. (Points : 25)

Tags devry exam final week bsop points product explain jobs choice design market work manufacturing operations hours scheduling schedule order used rule following shown requirements systems shop changes floor loading output bsop features centers page priority

Tutorials for this Question
Available for
$50.00

BSOP 429 Week 8 Final Exam - DeVry

Tutorial # 00022567
Posted On: 08/16/2014 04:43 PM
Posted By:
Best Tutors for school students, college students eUniversity
Expert tutors with experiences and qualities
Questions:
128
Tutorials:
324
Feedback Score:
Report this Tutorial as Inappropriate
Tutorial Preview …429…
Attachments
BSOP_429_Week_8_Final_Exam_-_Package.zip (162.12 KB)
Preview not available.
Purchase this Tutorial @ $50.00 *
* - Additional Paypal / Transaction Handling Fee (3.9% of Tutorial price + $0.30) applicable
Loading...