This item covers Modules 5-8. Scan, handwrite answers and upload
solutions. Show all required calculations for full credit.
Design a 16-Bit
values for all resistors
calculations and schematic
screenshot of several input/output settings from the 16-Bit DAC Circuit
Given R = 50Kohm
and C = 100nF what is the frequency of oscillation?
Given a required
frequency of oscillation of f = 10kHz and R = 8kohm, what should the value of C
signal to noise ratio given RMS Noise Voltage = 20mV and RMS Signal Voltage =
Calculate ETotalRMSgiven e21RMS=
5V and e22RMS=
SNR(dB) given a noise specification of 680nV
noise specification given SNR(dB) = 350dB
For a simulated
inductor application, to yield L = 75mH, R1 = 3kohm, and C1 = 200uF,
determine required value of R2.
For a constant
current generator, with a saturation voltage = 20V and a current reference of
30mA, calculate RLmin.
For a precision rectifier
application, given EIRMS = 5V, determine EOpeak.
For an AC to DC
converter, given EIPeak= 10V, determine EI.